View Single Post
  #10  
Old 29-Jun-2004, 23:12
nelly's Avatar
nelly nelly is offline
Registered Forum User
Ducati Corse
 
Posts: 3,134
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
The connection for the diagnostics is a three way AMP multipole connector tailed out of the ECU plug.
The mathesis connects into this.
The diagnostic software I have connects here to, via the 9 pin serial port on the PC.
Mathesis are very hard to get a hold of unless you are an authorised dealer. I got mine from one that had closed down a couple of years ago, and even then, the software cards I have only go to 2001.
I use the PC for most of the static stuff in the workshop and the new ECU's. The mathesis comes in handy for mobile work and setting the TPS etc.
Quote+Reply