Thread: belts
View Single Post
  #7  
Old 22-Aug-2004, 15:32
Garibaldi Garibaldi is offline
Registered Forum User
 
Posts: 23
Join Date: Jun 2004
Quote:
Originally posted by antonye


The belts are routed through quite a tight radius (radii?) in some places, and if they are left in the same position for any length of time, which 3K miles in 3 years certainly sounds like, then they are very prone to becoming stiff at these points.

This is why you must change them every 2 years - they cost less than 100 quid for the pair but the engine could be written off if one belt jumps the cogs due to a tight spot in them.

Better safe than sorry, eh?

Costs a fair bit more to have them fitted though. Best thing to do with low mileage bikes is to at least start them regularly and keep them somewhere warm in the winter. Don't rev them too much after first starting as this is when they are most likely to slip due to stiffness.
Quote+Reply