Well i finished putting it back together at 9.30 last night. I replaced the burnt out connector and the next one in line with some 40 amp wire i had lying around, soldered the joints and covered it all with heat shrink. Start her up and its all working fine! The only trouble is that I've now lost a little of my confidence in the bike although having said that its the first time i've had to use the recovery thing in the last four years. Guys, thanks once again for everyones help. Hopefully see some of you at the Unicorn in the not too distant future. Paul. ( i see the picture decided to display its self, it wasnt working last night) |