The R&G ones only fitted the "old" fairing with the cut outs when I looked them this summer.
They also mounted on brackets then on the frame.
I have a set from
www.cyclecat.com in the states, they sell through spareshack in the uk.
This set mount through the engine mounting bolt between the V of the engine which has to be a strong point, the down side is that you need to use a smaller battery although spareshack supplied me one at a good price.
Regard to cutting holes in the fairing I found another set of panels on ebay and will use them, once fitted you can leave the mounting bolts in place and remove the bungs therefore using your "best" fairing on the street and change to the "track" fairing with the bungs in a few minutes.
Hope that helps