So to recap I have stripped the top end, lapped in and reshimmed the valves. Checked the piston rings and bores, reassembled again carrying out a soft solder squash and setting the base gasket..... well today I took it for a dyno test, changed a faulty ignition coil which was causing a misfire The read out was just got over 47bhp but was set to 46.7bhp to get a better torque curve. Uhm.....what 4 bhp between friends when your a fat lad. Mark No81 who has a standard 600 ss produced 46.8bhp. Roll on Mallory! |