View Single Post
  #2  
Old 05-Mar-2021, 12:20
antonye's Avatar
DSC Member antonye antonye is offline
Administrator
Webteam
MotoGP God
Bikes: 748S, HM1100S, V4SP, Was: DD-A #111
 
Posts: 13,053
Join Date: Feb 2002
Mood: Passion Killer
Welcome!

Belt changes on a 2v are very easy in my opinion!

There are loads of videos on youtube showing you how to do it.

The main thing is to obviously set the tension correctly once you've done the actual belt change (and also checked the condition of the bearings, etc) so you might want to get someone who has done it before to watch over and check that you're doing it right, then you will know it's ok.

I always use the 5mm allen key method as it's pretty simple and difficult to get wrong!

Good luck and let us know how you get on.


I'd rather die peacefully in my sleep like my Grandfather,
than screaming in terror like his passengers.- Jim Harkins

Ducati 748S | Ducati Hypermotard 1100S | Ducati Panigale V4 SP #876 | 600-620SS DesmoDue Racebike #111 <-- Sold!!
Quote+Reply