Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > power commanders pc111

[bike mad]

A'm I right in thinking that they are capable of being programmed for each cylinder individualy or is it both together,
also where is the closest place to me in devon, who can do the dyno work to make the maps as my locals dyno does both pipes as one, ie not for each cylinder,
any and all information on the power commander I need it all,
thanks

[iang]

I have been trying to figure this out, on the PC3 program screen when 'advanced' map is selected the table is split into two, does this mean that an advanced map has been set up with both cylinders adjusted individually and the 'basic' setting is both cylinders together ?????

Is the advanced map any better ??

[Jasper]

I believe they can only be done as a pair.Mine was.

[Felix]

I am fairly certain that you can't map individual cylinders. The advanced mapping is to have two different maps in the PC and then select which one to use via an external switch.

[twpd]

They can be done individually. It seems rare that they are though. It would be normal practice to run the rear pot a bit richer cos they run hotter.

[Felix]

twpd, so can you map each cylinder seperately then even on a 4 cylinder bike?