Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > How do I bypass the immobiliser to fit a race dash?

[marchesini]

Originally posted by Ducman851
With the FIM unit installed I can start and run it wih no gauges at all. No so with the OEM ECU, they dont run without them.

Do I have to irreversibly do anything or just take the clocks off and rewire? I assume that all the red key business and reprogramming the keys are all related to the immobiliser function of the bike and clocks, i.e. once the FIM unit is installed, the chips inside the key do nothing or is there another security check hidden in the wiring somewhere?

One other question is that if someone can program a PCIII, is remapping/programming an FIM Ultimap any more difficult or in need of any specialist software/hardware?

Apologies for all the questions but trying to get a total cost to change to the translogic dash and to ensure that I don't make any purchases that are not going to work (or at least 95% chance of working). This is what I am trying to install:

http://www.translogicuk.com/install_...icro-Dash3.jpg

with more info here:

http://www.translogicuk.com/md2.htm

Thanks for you help and am quite optimistic that this can be done now. Do you have any recommendations of US suppliers for the FIM UCU?

Thanks and best regards

simon