| #10  08-Jan-2005, 15:14 | ||||
| ||||
| I drilled and tapped my swingarm for DP Hugger last week. Make sure that you use a brand new drill and tap. I centre punched the hole location after positioning the hugger, then used a 2mm dia "pilot" drill followed by a 5mm dia start drill. I then tapped with an M6 x 1.0mm pitch tap. All went well and hugger is snug as a bug and doesn't flap around like a flappy thing. Better than bodging it with velcro or sealant!!!  R X  |
Threaded Mode