 02-Apr-2006, 13:55 | #3 |
| Registered Forum User Posts: 42 Join Date: Feb 2006 Location: The Mad House, Very Sunny Cornwall Hi,I did this myself yesterday.There's a bleed screw on the top hose ,rear pot.Remove this and fill the rad until coolant runs out,replace allen screw and copper washer nip up tight.Then squeeze the top hose,air bubbles will come out of the rad filler,top up rad,repeat this several times,until there are no more bubbles to be seen.Replace rad cap.Run bike for a few mins,allow to cool and top up the overflow tank between marks and you're done. Steve  | |
Threaded Mode