Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Sport Touring: ST4 / ST3 / ST2 > Dzus fairing fasteners.......

[Rushjob]

I used standard Ducati ones which, when I've just measured them, from the underside of the flat on the head to the end of the fastener are 15.97mm!
I'd say use the 17mm. (this is the one they recommend for Ducatis on the website anyway.)
You will need to tweak the back of the receptacles to get the correct fit as I mentioned, or at least I did!

[Derek]

Originally Posted by Rushjob

I used standard Ducati ones which, when I've just measured them, from the underside of the flat on the head to the end of the fastener are 15.97mm!
I'd say use the 17mm. (this is the one they recommend for Ducatis on the website anyway.)
You will need to tweak the back of the receptacles to get the correct fit as I mentioned, or at least I did!

Great. Thanks for your prompt reply. I'll order them today.

[Chief R.B.]

Evening

This is a great thread, I've been thinking about converting my ss and this has given me a lot to go on. Well done and thanks for taking the time to post everything up Rushjob.