battery housing

jamespedro28 · 28-Dec-2009, 16:13

as you can tell i am not to up on modern technology but pretty good hands on with the oily bits .thanks for your understanding reply.

NBs996 · 28-Dec-2009, 20:05

I think you need to forget about passive arm for what you want to do... if you've got a fob with left and right buttons then it's a System 3. It will passive arm in full protection state, so you need to use 'service mode'.

In case you don't have your user guide - disarm the alarm as normal, turn on the ignition, hold down the RIGHT button until it beeps (about 5 seconds). The LED will stay lit and the alarm will beep every 20ish seconds. The bike is now completely separated from the alarm.

To come out of service mode, just press the right button.

jamespedro28 · 02-Jan-2010, 21:33

tried the suggestion of to put it in to servos mode .but it bleeps 3 times every 15 seconds instead of 1 .it does seem to have turned of the Maine alarm though.do you think it could be the trickle charge that was plugged in that has caused the problem. thanks againe pedro

jamespedro28 · 09-Jan-2010, 21:48

it was because i had it conected to the battery optimiser that it bleeped 3 times in service mode.i disconnected it and now its fine.ps some one posted awhile ago .about masking over the alarm because of the annoying sound every 15 seconds. it worked great thanks .

NBs996 · 10-Jan-2010, 10:40

I didn't know the bit about the optimiser causing 3 beeps... every day's a school day!

nelly · 11-Jan-2010, 10:36

Quote:

Originally Posted by NBs996

I didn't know the bit about the optimiser causing 3 beeps... every day's a school day!

Once in service mode and the bikes battery is disconnected, the bleeps come from the alarms on board battery. If it stopped when you turned optimiser off then the internal battery has given up. Usually takes about a day to die if battery is good.
Not a major problem, but it means that if the main battery is disconnected the alarm won't go off. You can replace the backup by taking the lid off the alarm. It's a rechargeable PP9.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

28-Dec-2009, 16:13	#1
jamespedro28 Registered Forum User Posts: 17 Join Date: Dec 2009 battery housing as you can tell i am not to up on modern technology but pretty good hands on with the oily bits .thanks for your understanding reply. Reply

02-Jan-2010, 21:33	#3
jamespedro28 Registered Forum User Posts: 17 Join Date: Dec 2009 battery housing tried the suggestion of to put it in to servos mode .but it bleeps 3 times every 15 seconds instead of 1 .it does seem to have turned of the Maine alarm though.do you think it could be the trickle charge that was plugged in that has caused the problem. thanks againe pedro Reply

09-Jan-2010, 21:48	#4
jamespedro28 Registered Forum User Posts: 17 Join Date: Dec 2009 battery housing it was because i had it conected to the battery optimiser that it bleeped 3 times in service mode.i disconnected it and now its fine.ps some one posted awhile ago .about masking over the alarm because of the annoying sound every 15 seconds. it worked great thanks . Reply

10-Jan-2010, 10:40	#5
NBs996 Registered Forum User Ducati in my Blood Posts: 4,728 Join Date: Sep 2003 Location: The deep south Mood: I love my 996 xxx I didn't know the bit about the optimiser causing 3 beeps... every day's a school day! Reply