| Changing Eproms
I've fitted a 45/50mm half system to my 996 (and by god it was hard work getting the termis to fit with only 2 hands , my forehead and one of my legs).
I have a new eprom to fit and the furthest i've been is removing the round bit above the eprom. I know i have to remove the two blobs of silicone then extract the chip but that sounds easy and i do not want to break anything.
Can someone please talk me through the process as i don't want to go cack-handed into this. My dealer says it's easy peasy but i'd rather be forewarned of potential pitfalls.
Here's to a stupendously good summer riding !!!!
Cheers,
Russell. | 
26-Feb-2006, 00:52 
Threaded Mode