Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > will a 50mm termi slip on fit the 998s

[funkatronic]

H there

i am looking at a 2nd hand set of termis from a 916

i have been told these are 50mm, will these be an ok fot for the 998s (which from what i can find has 50mm headers and link pipes)

thanks in advance

ali

[Cobbett]

Yes: stock 998 was 45mm but S is 50mm.

[skidlids]

The 916 came with 45mm Headers but a 45mm to 50mm half system was a popular conversion so double check they are 50mm if they came off a 916

[funkatronic]

can you confirm 916 (748, 996) and 998 termis are all the same (for a give pipe diameter)

thanks

[skidlids]

Hope i'm right with this little lot

45mm = 748's (but not the 748R) 916, early 996BP's and 998BP
50mm = 748R, 996SPS, some Later 996BP's, 998S and 998R

[funkatronic]

great thanks

i think its from a 916 sps,