Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > adjustable forks - which ones fit M620?

[bradders]

as title, can I fit any Ducati ones, eg 998, 916, 900ss

my guess is yes as long as 65mm spacing for brakes and same front wheel spindle but not sure about yokes etc

thanks

[dunlop0_1]

Don't think yer allowed to change them. Any Ducati forks that fit into the standard 50mm yokes.

[bradders]

A you are - can have adjustable forks.

so anything except Ohlins?

[Chaz]

You can fit any Ducati forks as long as they fit the standard (for your bike) yokes.

There is a little legal fiddle though.

[bradders]

sorry, I know I'm dim - I just ride em! - I'm looking at a set of 998 and ST2 forks - will they drop straight into my soon-to-be-mine 2002 M620?

[antonye]

Originally Posted by bradders

sorry, I know I'm dim - I just ride em! - I'm looking at a set of 998 and ST2 forks - will they drop straight into my soon-to-be-mine 2002 M620?

Ducati uses two sizes of forks - 50mm diameter and 53mm diameter.

Yours will be 50mm diameter, as used on most Monsters, Supersports and the other "smaller" bikes.
The "large" bikes get the bigger forks - 916 line, 999 line, 848/1098/1198, etc.

So no, they won't fit!

[bradders]

ok thanks

must check the rules then and see if I can change the yokes too...I thought some were running 996 forks....

[Ghost]

Originally Posted by bradders

ok thanks

must check the rules then and see if I can change the yokes too...I thought some were running 996 forks....

Its no Yoke Paul, std ones for the bike, or peeps would be fitting T9 ones etc.

[bradders]

wonder what size M1100S are, nice radial calipers on those

would ST2 fit?

[Senna3]

900ss or st ones will do just check lenth as some are longer than others i have st ones and are about 65mm longer just means they poke throuth the top yoke a bit more could be good if you wanted to put clipons ubove top yoke ideal for a bad back