Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > My Class A bike slowly takes shape

[skidlids]

Well with just under 2 weeks to go until Oulton I still have a fair bit to do to my 620SS class A bike
But at least I have started
Here are some pics from Yesterday

[chris.p]

Looking good Kev.



Chris.

[GsxrAge]

You taking the motor out of washing machine for xtra power

[MLC Racing]

Washing machine will shake less and rev faster!!!!!

[Jon]

Kev you should be on Blue Peter, its amazing what you can do with an old washing machine and a cardboard box

[skidlids]

You have got to make sure you give the parts a good clean before assembly,it also comes in handy for putting spanners, allen keys etc on

Need to make some phone calls tomorrow and track down a airbox

[Felix]

Originally Posted by skidlids

Need to make some phone calls tomorrow and track down a airbox

Now, that's dissapointing. Can't you just make one?

[weeksy2]

he doesn't have enough Kitchen roll tubes or sticky back plastic

[skidlids]

Its a live !!!!!!!!!!!!!!

The bike is now a runner, started first push of the button on the 750SSie Harness and ECU.
Just need to mount the coils, get some SSie plug leads (using 916 ones at the mo), sort a air temp sensor, fit the rev counter and temp gauge, chuck on last years DD bodywork, do a final nut and bolt check and go testing somewhere.
Then sort the front suspension with a set of single rate fork springs.