Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > torque settings

[9rrr]

What are the torque settings in Nm for spindle nuts for front wheel on 996r and nut torque setting. Thanks

[doogalman]

Can't remember of the top of my head, however you can download a manual here;
http://www.duc.nu/manuals/

[sie748]

if the torgue is same on all models axle nut is "63nm"and the axle clamp bolts are"19nm"

[polarexpress]

Like sie748 said only there's a 5% tolerance for both of them so you'd better use a decent quality torque wrench.

Use Shell Retinax HDX2 on the threads and make sure you tighten the axle clamp bolts in a 1-2-1 fashion.