Quote:
Originally Posted by skidlids 749/916 Pumps usually have one of two types of hose connections, either a banjo bolt and steel pipe that the hose pushes on to or the quick release fuel couplings like these http://www.ebay.co.uk/itm/MOTORCYCLE...em46002 2ffa0 748/916 pump unit is fitted with a 3-bar fuel pump and a matching 3-bar fuel pressure regulator to suit fuel injection |
Skidlids
Does that mean this carb 2 valve won't run properly with this tank?
Trouble is I don't know how it ran before, I bought it in bits not running along with an M900 for the motor.
The outlets on the under side of the tank had 2 long pipes 13" long then a Y connector and another pipe approx 9" long to the carb rail way too much pipe under there. Also red and black connectors wired up to the pump?
I've had it running pouring fuel down the rail, starts very easily rear cylinder quiet, front sounds like I've dropped a spanner down plug hole. No smoke.
Any info on how to do this tank please, have to get it finished now.
Thanks for everyone's help