Where to buy - 996 racing ally rear subframe Can anyone recommend me a good place to buy an ally rear racing subframe for a 996? Thanks! |
try moto46 |
Quote:
Thanks. Will call them. |
Carefull, 996 and 748 are almost the same but not quite. 996 is based on the SPS one and was designed to take the P8 whereas the 748 was designed for the 1.6. Not that it matters that much for the ECU because a race bike has it front mounted anyhow... but the carbon seat supports are different for either bikes. |
Quote:
Right so, a 748SPS or 748R subframe should work, right? Not sure we'll have the necessary time to sort a wiring harness to front mount the ECU. |
Itīs not going to fit properly. I went through it with my 748S ECU and wiring harness. Bought a 996 al subframe and had to lengthen the wiring loom by about 10cm. |
|
Quote:
Depends what ECU you run. If you run a P8 you need to look for a 996 ally subframe - generally coming from 996 SPS bikes. |
Quote:
That one looks like a 748 one to me. |
Yes, thatīs one for the M1.6 ECU. |
All times are GMT +1. The time now is 17:05. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK