Quote:
No, you shouldn't see a "1", as that is only for new instrument panels (clocks) rather than reprogramming keys. As per below, you will only see the countdown start when you put the first black key in if the clocks are already programmed. You also must wait at least 30 seconds (give it a few minutes for safety!) BEFORE you put the Red key in to start programming. Instructions for systems with LCD display: Note: For instruments with LCD display, the word OFF appearing on the display while programming the immobilizer indicates that programming procedure has been aborted. You will need to begin programming again.
Note: For instruments with LCD display, the instrument panel display shows how many keys you have inserted and a countdown from 30 to zero at the side. The number of inserted keys changes depending on the type of programming. When the instrument panel is programmed for the first time from new, a number "1" is displayed. When a key is reprogrammed, the display will show number "2". Note: When the new instrument panel is used to program a new key, the countdown starts the moment the red key is inserted. When re-programming a key, the countdown begins when the black key is inserted.
|
What's happening now is sometimes the new key i got coded at the shop works and sometimes not ie the eobd light is on, ditto the red key this led me to try the original key and that's back to working sometimes, the code is always 37.0 the transponder but doesn't it look more likely its the antenna?. Cheers in advance. |
All times are GMT +1. The time now is 23:34. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK