Whats wrong with this picture?
 

Has anyone got a spare they want to sell me its on a 748 but thing most dry clutch hubs will fit.

Looks like the screws have seized in the posts and one of the posts has snapped when the screws have been forced.

I always used copperslip and I think the torque value is only about 5nm, or just "nipped up"

Yep spot on, think someone must have used threadlock and a couple of the bolts rounded. A light tap with a centre punch was not the way to go apparently :mad: Hence the need for a new one.

MPL do some nice clutch plates - I have one in my 900ss:

http://stores.ebay.co.uk/mpltuningpa...?_fsub=8532705

as do Oberon:

http://www.oberon-performance.co.uk/...ates_Copy.html

and MANY others...

Yeh they know how to charge dont they :o

:D
Fix it

Turn it into a 4 poster like the race ones, might need to upgrade the remaining 4 springs though

Drilled, tapped and counter sunk the back of the hub and shreadlocked a m6 high tensile bolt in.
Talked to a Ducati mechanic who said he had done a couple and they were still going.

Will use until a good one turns up.

just noticed these
http://www.ebay.co.uk/itm/Ducati-Mon...1516165591 87