2 into 1 exhaust on a 600 Monster
 

Hi,

I'm thinking (and I'm almost decided :D ) about converting the standard exhaust line of my Monster in a 2 into 1. Because the 600 SS came with a 2 into 1 stock, I think the 600 engine shouldn't be bothered by that. What do you think?

Tonio I think you should be OK with it my 583 ran with its standard 600SS downpipes all season and on the MHP dyno it was kicking out approximately 51bhp

Tonio, will talk to you later tonight mate;)

AK

why? get some high level cans, looks better and gives loads of clearance

Cheers Skid, I will now definitely go for it :D I've got the can, just need to sort the line out.


In your opinion. I don't like high levels on a Monster. I prefer them like this:
http://www.planete-ducati.com/img_an...randimento.jpg


There is something to change in the exhaust line as well, it doesn't give enough ground clearance:
http://a.josserand.free.fr/2004-08-1...de_au_sol.jpeg

I dont suffer any trouble with clearance on my exhaust, considering i'm using standard down pipes its tucked up out of the way quite nicely.

The rearshock on my Monster is a bit old, so maybe I won't have any problem after fitting a good rearshock on the track Monster...

I think my bike wil have to meet Mr MHP... :D

And his Dyno, and his wisdom :D