Showa Fork torques 1000SS, - can someone oblige with the bolt torques of the top clamp, lower clamp & axle pinch-bolts please.? I'm not sure how many other models share the same fork, 43mm Showa. |
I have never used a torque wrench for these just tightened them about the same as a spark plug, never had an issue. |
I believe the Forks from the ST series are very similar, so as a guide here are those figures: Tables never work so a * shows the main Nm figure Category Component Torque (Nm) Torque (inch pounds) Torque (foot pounds) Torque Wrench Frame Bottom Yoke Screw 20* 177 15 Medium M8 X 1.25 Shell Retinax HDX2 1-2-1 Sequence Frame Top Yoke Bolt 23* 204 17 Medium M8 X 1.25 Shell Retinax HDX2 Frame Fork Bottom End Bolt 19* 168 14 Medium M8 X 1.25 Shell Retinax HDX2 1-2-1 Sequence |
All times are GMT +1. The time now is 21:23. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK