STM EVR Slipper clutch
 

Hi all,
I brought this slipper clutch last year, am just getting around to fit it to my bike and was watching a video on how to install a slipper clutch, the person fitting the clutch mention about a spacer which comes with the clutch. Ive posted a photo of the clutch i think the spacer is missing. Is there a uk dealer where i can get spare parts or can i use the stock spacer.
Thanks
Aide

Part # 71310951A "Spacer" from your local Ducati dealer.
It's a different size to the standard spacer.

Thanks for the reply,
I ordered the spacer with new seal, does anyone have a drawing or a link to one which showing where the washer goes and which way around it goes.
Cheers.:)

Not sure if this will help:

Part No. 8 in the attached pic, do they still cost round £32

also make sure you grease the ball bearings on the ramp. I know someone who mangled their clutch when these jammed.

Thanks for the replys guys.
I received the spacer today with some oil seals, does anyone know which way round the dished washer goes (no.10 on skidlids diagram), the one which goes on after the spacer. Would you guys say i need nos. 10 & 11 washers aswell as i dont have them. The nut i have does fit nicely inside the spider spring though.
Skidlids the spacer was £19.40........
Cheers.

On most of my slipper clutches parts 10, 11 & 12 are all a one piece nut come spider spring locator. The Dished washer that goes between the spacer and the centre clutch hub I insert so that its the same as looking into a bowl