Datatool Veto Evo Today I went to use my bike and the alarm would not disarm with the keyfob. My spare one worked ok and so I used that. Anybody any experience of this? The LED lights when the buttons are pushed. The battery is good as I swapped it with the good one. Any ideas? |
Sounds like it need re-aligning. |
Quote:
What does that involve Nick? |
press both buttons at the same time for about 5 seconds (until it beeps). Can't remember what state the alarm has to be in for this procedure... i think it's fully armed, but if that don't work try it disarmed with ignition on. Otherwise I've got no other ideas. |
Thanks Nick. That did the trick. :) |
Quote:
Col, I have the same problem with mine...what state did you have the alarm in when you did the "re-align"? Thanks in advance to both Nick and Col |
It was in the armed state. I pressed both buttons together and the alarm did a double bleep within seconds. I then let it arm its self and then I was able to use the key fob as normal. Good luck and thanks again Nick. |
Many thanks! |
|
Thanks. What a wonderful club this is. |
All times are GMT +1. The time now is 03:09. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK