Class B 600ss For Sale. Race Winning Bike 4 Attachment(s) For sale: 583cc Class B bike based on 600SS. This bike is race ready and for those who don't know the history it was built by Chris Pullen and raced by Paul Pullen until I bought it in 2013. The bike has taken me to numerous race wins and podiums and second place in the championship in 2014 missing first by 1 point. All the trophies pictured are from 2014. The bike has also achieved 3 lap records that still stand. The engine has been looked after by Alistair Wager of Britalia Moto every year for a full top end service and new belts and the carbs have been set up by BSD Performance in Peterborough with the last Dyno run making 51.4 bhp and 38.46 ft-lbs. It was weighed by scrutineers at Oulton Pk in 2013 at 157.5KG with 2 litres of fuel on board. I have just put new oil and filter on and its mechanically sound and ready to go out on track. SPEC SS frame lightened/cut back as per rules, powder coated in 2012 late type lighter front and rear wheels powder coated in 2014, new bearings june 2014 Brembo P4 callipers Galfer wavy light front discs OE rear disc machined thinned and drilled IRC master brake cylinder Nitron rear shock with remote reservoir (New in 2012) Aluminium swingarm Direct gear shift in race mode but I have the road shift version which can easily be fitted 1098 full fairing (scuffed but fully intact and useable) Fork and frame crash bungs Custom seat unit Brand new regulator rectifier Oil cooler 2 into 1 exhaust. Simmi custom made stainless end can Open airbox conversion and K+N filter SS OE steel tank with internal fuel pump (couple of small dents) New 7aH lead acid battery I have loads of other pictures of the bike in various different stages of build right down to the bare frame, just ask and I can email. Im moving up to class A this year and need the room in the shed so Im putting it on here first and will shortly be putting it on ebay. Im asking for £1950 for the bike as it stands. The bike is in Lincolnshire but can take to a race meeting if Ive still got it for viewing. I also have a large spares package that I am willing to sell with the bike, cost to be negotiated. To list just a few items: Spare set of front and back later lightweight wheels with tyres, new bearings and new cush drive rubbers Rear wheel (earlier type) 2 x fuel tanks (1 is dented) loads of different rear sprockets plus 2 x sprocket carriers selection of clip on bars, footpegs, gear and brake levers, clutch levers etc 2 x full 916 used fairings 1 x full set used 1098 fairings (painted black)with dzus fasteners and screen 1 x seat unit AL9000 ducati performance ignition units brembo cast iron front brake discs lightened OE rear brake disc (machined thinner and drilled) front sub frame Different sized spring for rear shock 2 x different length shock ends to adjust ride height Fork springs and internals Steel swingarm Alternator crankcase cover (left side) regulator rectifier (1 phase) New in box Simmi end can Crash bungs Top and bottom yokes Boxes of other stuff, so much I cant even list it all [ATTACH][ATTACH][ATTACH]Attachment 14205[/ATTACH][/ATTACH][/ATTACH] Attachment 14202 |
Bikes now on eBay http://www.ebay.co.uk/itm/2217286947...84.m1555.l2649 |
Sold. Good luck to new owner Josh |
All times are GMT +1. The time now is 22:04. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK