Ducati Performance Alarm My second hand 996s came with a Ducati Performance Alarm fitted and no instruction book! I've never had a bike with an alarm before, so could anyone help me out as to how to set it correctly. The immobiliser seems to activate automatically, but if I try to arm the alarm (one press on the left hand red button), the alarm goes off after 1minute........Help :( |
Tha DP alarm is actually a Spyball Patriot. BTW. Yes the immob is automatic - signified by a quick flashing warning light. The alarm is activated (as you say) by the LH button. After u press the button it takes 1 min to arm - during which time u should see a constant red light, at the end of this period it should change to a slow flashing light, signifying the alarm is set. If the alarm sounds at the end of the 1min arming period you have a fault!! but you knew that anyway:yawn: IMHO the most likely causes are: 1/ water in the alarm or associated loom, 2/ there is a microswitch with a thin metal arm that protects the alarm from tampering. When the body panel over the alarm(wherever it is) is removed, it trips the switch, a failure here will cause the fault u have - believe me I know!! Have u taken off the fairings and bent this arm by accident?? Its quite easy to do. I have a copy of the alarm instructions, which I will try to copy if u like? Dion |
All times are GMT +1. The time now is 15:18. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK