ST4S - Shocker I have today taken delivery of my nice new Ohlins 46HCRS rear shock absorber with remote adjustment - ala ST4S for my ST4. Would any kind ST4S owners post any photos of the remote valve and gas cylinder positions and fixings. Also it didn't come with a C spanner and mine is out on loan, are they all the same, will the one that came with my ST4 for adjusting the Sachs unit fit. Thanks as always |
Do you need a c spanner for the ohlins shock? I thought they had a remote preload adjuster. |
well its got a big nut thingy, so i assumed that you might have to adjust it to get it in range of the regulator valve, but im guesing. |
Hope these help..... Remote adjuster behind rear offside passenger footpeg mount... |
View from the rear light showing bracket.... |
And finally the damping cylinder - same location as the standard one... |
As for the spring adjustment - I've never needed to touch the locknuts but then I only ride singly... if you take a pillion you may wish to wind some preload on to get your sag close... |
Hmm, the owners manual makes no mention of it and the tool kit doesn't include a c spanner. no doubt another 4S owner will be along soon to help out. I also notice that the only ST models available for 2006 are the ST3 and the ST3ABS. Hadn't reaised that. |
You had a big Yeti on the back once Andy! |
Funnily my tool kit came with a c spanner.... the one for chain adjustment on the 748 / 9** range! |
All times are GMT +1. The time now is 10:33. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK