Wanted: SS side fairing stay Hiya, I'm wondering if anyone here has one of those "tubes" that act as side fairing stays on a carby SS - it bridges the gap between chassis and side fairing. I'm after another after I bludgeoned to one death on my DD bike. Would be enormously grateful, and of course payment would be due! PM if you can help. Thx. Jason. |
Jason I got two let me know still need them |
Hi Jason, one mod I used (but cant remember where I got it from) was to pull out the rubber grommets in the tube and use a single very long bolt that is the full length of the tube + a little extra. I found a supplier that sold bolts longer enough that with a few washers and a nyloc nut on the end I could get a rock solid fit. Cheers - Frank |
I'm hoping to get some replacements made in the way of a inch wide stainless "Z" bracket that will allow the use of Dzus fasteners as I to need to replace the one on my race bike after my off at Mallory |
I used to use a long bolt through a bit of fuel hose. The bit of fuel hose makes sure the fairing doesn't rattle along the bolt. Worked fine. :) |
All times are GMT +1. The time now is 01:39. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK