WANTED:Monster/900ss Rear wheel spindle
 

Does anybody have a Monster/900ss 17mm rear wheel spindle they don't need? The cheaper the better as I am going to cut it up for a project!! I know lengths vary,but it needs to be about 335mm long.Nuts would be good too!!:D

Is that the ally swingarm, threaded both ends?

I've got the other type you can have if you're cutting it down.

Unfortunately,Yes mate.Threaded both ends.Ally swingarm.How long is the other type?It does not need to be threaded both ends.My spindle is 335mm long and shows about 20mm either side of swingarm plates.If it's long enough,I'll give it a go please.I'll drop you an e-mail.

Would a 600ss one do ?

http://cgi.ebay.co.uk/Ducati-Monster...em43a3a d0ae5

Found a 900 as well

http://cgi.ebay.co.uk/DUCATI-900SS-9...em27b8c b56ff

600's aren't wide enough mate.900's are good.Thanks for the links.