Datatool 3 Strangeness
Sometimes when I engage the alarm it beeps as normal, then about 30 secs later makes other weird beeps - some long & some short..This lasts on & off for about a minute, then stops. It has started to happen quite regularly.
Does anyone else get this, or know what it means?
Could be the internal battery on it's way out? There could also be possibly a problem with the actual power feed to alarm, either the live or the earth?
Check the fuse is not blown? Other than that either get in to your nearest fitter or give Datatool a call. Their tech. support is usually pretty good.
Sounds like the pre-activation warning. Could be something wrong with the motion sensor but that's only me speculating!
Nelly's right, Datatool's tech support is pretty good, the number's on their web site.
Thanks for the advice guys - I don't think the problem could be with the internal battery as the unit is not even a year old yet. The noises are different to the pre-activation tones, they sound sort of 'drunk' and sluggish, like something's malfunctioning.
I'll check the fuses when I get a day off, and if they're ok I'll contact datatool..
|All times are GMT +1. The time now is 07:27 PM.|
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2018, Jelsoft Enterprises Ltd.
© Ducati Sporting Club