Ducati Sporting Club

Ducati Sporting Club (/msgboard.php)
-   999 / 749 (/forumdisplay.php?f=84)
-   -   748 frame + 749 swingarm - how to adjust ride height? (/showthread.php?t=235879)

Erik Ruban 11-Aug-2013 03:31 PM

748 frame + 749 swingarm - how to adjust ride height?
Hello guys I am new to this forum. I hope I will find help from you with my project bike. I've successfully assembled 748 frame with 749 swingarm and 2V 900cc engine. I have 749 shock and ride height rod,with 749 dogbone /I think both 748 and 749 use the same dogbone/.
Now I don't know how to adjust the ride height ,because I'm using parts from different bikes ,and the tools for adjusting are different for both bikes /I think so/.
My other concern is that the 749 shock is shorter than 748... I can fabricate a longer ride height rod ,but the angle of the dogbone will be different , is this a problem?
I need help with this ... I'm an amateur with a lot of imagination and some technical skills.

skidlids 11-Aug-2013 09:38 PM

I thought both shocks were 305mm

Erik Ruban 11-Aug-2013 10:49 PM

there is something different, the shock length or maybe the dogbone mounting position is higher on the 748 frame

All times are GMT +1. The time now is 12:45 PM.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2018, Jelsoft Enterprises Ltd.
© Ducati Sporting Club