| More progress so far...
The engine is off to TecMoto to have the big-bore kit fitted and then the engine serviced and setup. The frame is now being cleaned (half way there!) and I've checked the steering head bearings which are fine.
The wheels have now been cleaned thoroughly and the front has twin disks on (cheers Ali). I've also stuck a pair of Pirelli Diablos onto them so I'll be ready to rock once the bike is back together.
The carbs have now been cleaned up, de-gunked and DynoJetted as well.
Next is finish off the cleaning of the frame, then fit the new forks and the front wheel. I can then put the bars on and mount up the front brake with the twin calipers and 916 master cylinder.
Here are some pics.
Carbs before, sitting on the kitchen table... |