02 900 Ohlins set up.

[DaveDuc]

Guys,

Help required...........

After an enforced absence of 5 months I'm back on a Duke!
The 70 odd mile ride back yesterday left me grinning like a cheshire cat - I now remember what I've been missing!!!

Does anyone know what the standard factory settings are on the Ohlins shock?

BTW the guy had set the back up real funny - i.e. rear compression damping = 0, and rebound = 0..........., front comp and rebound = full !

Made for an interesting test ride..........

Cheers

Dave.

[tont2002]

If you have the hand book it tells you the standard settings in there. :P

Shock absorber adjusters (900)
The Öhlins shock absorber fitted to the 900 model
features also length adjustment. It allows to adjust the
seat height regardless the spring preload.
• Compression damping adjuster (1):
14 clicks.
• Rebound damping adjuster (2):
10 clicks.
Undo lock nut (3) and nut (4) to change original setting.
STANDARD spring length:
160 mm

This is taken from the manual.

There's a few downloadable manuals on the ducati site:- http://www.ducati.com/bikes/manuals.jhtml

Hope that helps mate. I can always swop ya a perfectly set-up showa. :D

Steve

[Edited on 2-9-2004 by tont2002]

[DaveDuc]

Tont,
All I've got in the handbook is basically where the adjusters are - not much help - it does show hoever the range of adjustment ie 10 clicks so I'll try middling them out and see how I go......
Ta.
Dave

[tont2002]

soz mate was re-editing that as you replied. took a bit to find it. ;)