Speedo drive spacers

[Paul James]

I've been asked by one of the entrants to make up some bits for his bike, one item which may interest others is a spacer to replace the speedo drive on the front wheel. It should make wheel changes easier. This fits a 20mm spindle and is 35mm long, if this fits your bike (depending on model) and you'd like one in Aluminium they will be a fiver each if you send me a jiffy bag with stamp and address on.

Anybody stuck for turned parts for the bikes or proper thread inserting just get in touch.

Best email direct at ducatiman@btconnect.com if interested.

[antonye]

Anyone who knows the models enough to say which this will fit?

It'll save me heading outside with the micrometer....

[Paul James]

i doubt if they differ much but any info would be helpful. Will need to know interest by Friday so I can get on and do the machining.

[antonye]

Will deffo have one Paul - at that price it doesn't matter if it doesn't fit!

[skidlids]

At 35mm wide with a ID of 20mm and a OD to suit then they will deffo fit the 1996/7 600SS, as I have already made a couple of nice Alloy ones for mine and Senna3's bikes.

[Paul James]

Thanks for the info Skids, I guessed it might be a fairly standard part.

I've been offering a thread repair service for some time now, I hate helicoils so when I was racing sourced some fantastic solid inserts. As my engines were regularly stripped and rebuilt I put inserts in to the cases at vulnerable points which made working on them much easier. It can rescue damaged castings which you might otherwise have to chuck away !.

Anybody interested just give me a call.

[fil2]

deffo have one of them have sent u an email


Phil

[skidlids]

Fitted mine this morning after finishing off the fork rebuild, looks a lot nicer than the speedo drive. Another couple of jobs off my list, now back to the garage.

[antonye]

Been out in the garage myself and not having the speedo drive will make the carbon dash look a lot better :D

[Paul James]

Originally posted by antonye
Been out in the garage myself and not having the speedo drive will make the carbon dash look a lot better :D

Erm, it doesn't fit there mate, it goes on the wheel spindle ??

[phoenix n max]

All i can say is there is a different spindle size from early monsters to late monsters if that helps? Early monsters have smaller spindles than the later ones.

[antonye]

Originally posted by Paul James
Originally posted by antonye
Been out in the garage myself and not having the speedo drive will make the carbon dash look a lot better :D

Erm, it doesn't fit there mate, it goes on the wheel spindle ??

Everyone is a comedian!

I needed to pull the dash apart to move the fuses, and have been toying with making up a carbon dash. Without the speedo it will be much easier, so fingers crossed it will come out ok.

[TP]

Originally posted by antonye
Everyone is a comedian!

I needed to pull the dash apart to move the fuses, and have been toying with making up a carbon dash. Without the speedo it will be much easier, so fingers crossed it will come out ok.

Poor recovery - 2 out of 10

Paul, can you administer the beating please?

[Edited on 6-4-2005 by TP]

[Paul James]

Originally posted by TP
Originally posted by antonye
Everyone is a comedian!

I needed to pull the dash apart to move the fuses, and have been toying with making up a carbon dash. Without the speedo it will be much easier, so fingers crossed it will come out ok.

Poor recovery - 2 out of 10

Paul, can you administer the beating please?

[Edited on 6-4-2005 by TP]

:lol::lol::lol::lol::lol::lol::lol:

[antonye]

*sulk*

[Paul James]

Some of these have been sent out now so let me know if you've asked for one but it hasn't turned up. Got a few spares if anyone else is interested.

Was browsing MCN online the other day and found a couple of 600 monsters and 600ss's fairly cheap. One 620 monster nearly new for 3 grandish.

[Edited on 12-4-2005 by Paul James]

[antonye]

Mine arrived this morning and all fitted tonight. Nice piece of work there Paul - great stuff :D