PDA

View Full Version : Anyone heard of a SPC??

Mr C
11-May-2005, 12:38
...as in 916 SPC says its got the usual SPS & SP3 bits. Ive never even heard of an SP3 either

[Edited on 11-5-2005 by Mr C]
Twinfan
11-May-2005, 12:49
Sounds like a loud of rubbish. There was the 916, the 916SP and the 916SPS...
phil_h
11-May-2005, 12:49
Could it be this one ?
http://www.spc.org.uk/other/index.html
nathanhu
11-May-2005, 12:54
i know someone with a 916 sp3 !!!
nathanhu
11-May-2005, 12:55
i also didnt know they exsisted....:ninja:
Mr C
11-May-2005, 12:56
looks someones using a bit of creative license then
nathanhu
11-May-2005, 13:04
where is it ???
ebay or local....
ziggi
11-May-2005, 13:39
The 916SP3 is the designation for the 955 Corse model of which there were very few made. So it could be a mis print, or if someone relayed the information over the phone for an advert??
antonye
11-May-2005, 13:47
http://www.ducati.com/bikes/techcafe.jhtml?artID=21&detail=article&part=technical&value=technical
ziggi
11-May-2005, 13:58
916 SP3 http://www.roadracers.co.uk/ducatisp3.htm
pguenet
15-May-2005, 19:19
There was no SPC.

The SP3 was the last of the 916cc engined SPS. It wasn't a 955. It was made that you could bolt a 955 kit straight on though.

The 916SPS was the first of the 996cc engined ones I believe although not totally sure about that. I believe that there was a 916 one in 1997 and a 996 one in 1998.

The 955SP is a rarety that was just made for the US homologation. 50 of them produced. Nothing utterly special though, just a SP with 955 kit.