PDA

View Full Version : Full 54mm Termi system on eBay

khu996
16-Jan-2006, 21:35
Nice titanium system on fleabay here:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8029458390&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

Just wondered if it would fit the newer swingarm (specifically a 2004 749R)?
andyb
16-Jan-2006, 21:49
I recon its 2003...........swingarm type.
khu996
16-Jan-2006, 21:53
Bugger!

Would have been nice if it did fit. Titanium end can as well...
Real McCoy
16-Jan-2006, 21:59
Get it alterd to fit your swinger only about £100 sqid ;)
khu996
16-Jan-2006, 22:08
Originally posted by Real McCoy
Get it alterd to fit your swinger only about £100 sqid ;)

Do you know anyone who can do the work with titanium?

I'm very worried about burning the carbon fairings!

Had my mind set on a full 57mm, but the prices of full titanium system take the ****.
Real McCoy
16-Jan-2006, 22:24
try Zorstec in Bradford(just across the road from ducati leeds)

http://www.zorstec.net/flash.htm

[Edited on 16-1-2006 by Real McCoy]
khu996
16-Jan-2006, 22:32
Has anyone on here had a system for the older style swing arm modded to fit the newer swing arm?

Any experiences?
Real McCoy
16-Jan-2006, 22:37
Originally posted by khu996
Has anyone on here had a system for the older style swing arm modded to fit the newer swing arm?

Any experiences?

Yes me you have to move the exhast pipe 10mm so the swinger doesnt crack it on rebound,put some heat resistant tape on the fairing so it doesnt burn thats about it (mines 54mm) ;)
khu996
16-Jan-2006, 22:44
Good job, cheers McCoy!

Is yours a titanium system too? Who did the work for you?

I don't mind sending the pipes up to them, but taking the bike as well would be a pain.
Real McCoy
16-Jan-2006, 22:48
You would need to take the bike to Zorstec, they have only ever done mine so would need to offer it up to your bike.

Im sure its not to big a job for a good fabricator in your area ;)
khu996
16-Jan-2006, 22:52
Yeah, might take the chance. Though it might be a job finding someone to work with titannium round these parts.

Thanks for the advice though...:D
andyb
16-Jan-2006, 22:52
I thought the pipe work was s/steel, with a t/i can? A full t/i system would be a lot more money.....................
khu996
16-Jan-2006, 22:57
Yeah, me too. Sent him a question, and he said it was definitely all titanium? :puzzled:

But I've been doing some Googling with the part number he lists, and what little info that is available suggests its a titanium can with stainless pipes? Might ask him again...
andyb
16-Jan-2006, 22:59
Could you get t/i tubing to alter it?
khu996
16-Jan-2006, 23:02
Should be able to, though it would be far easier if it was stainless, in terms of having it modded.

Sent him another message asking him to confirm if it is all Ti....wait to see what he says.

Anywhere else I can get a full system at a reasonable price?
khu996
17-Jan-2006, 12:58
He got back to me...after checking the pipes, it appears they are stainless!
andyb
17-Jan-2006, 19:30
Originally posted by khu996
He got back to me...after checking the pipes, it appears they are stainless!

no shhht! ;):lol::lol: