PDA

View Full Version : Coolant capacity


stu 748
04-Apr-2006, 21:26
Hiya Guys,
In the haynes book it says 3 1/2 litres of coolant is this right???? When i drained the old stuff out i only got 2 1/2 litres out, is that normal and am i right in thinking that some of the old coolant stays in the system or should it all have been drained out. So far i have got about 2 1/2 litres back in the system and i doubt if there is room for another litre as the header tank is up to the limit
Stu:puzzled:

Carbon749
04-Apr-2006, 21:29
I'm guessing you did not get the full volume out of the system when you drained it. There will normally be some left in the engine.

stu 748
04-Apr-2006, 21:30
But a litre sounds a lot too be left in there doesnt it ???

Carbon749
04-Apr-2006, 21:54
Originally posted by stu 748
But a litre sounds a lot too be left in there doesnt it ???

Only a 1/3rd of the system capacity. I'm no expert but it sounds about right to me.

nelly
04-Apr-2006, 22:32
You'll never get all the coolant out without a complete strip down. If you want to get the maximum out, remove the hoses fully and put the bike on the side stand. You'll still get some trapped in the cylinders and heads though.
You'll maybe get 3 litres out that way.

stu 748
04-Apr-2006, 23:19
Thanks again guys

Stu