PDA

View Full Version : Sprocket Carrier Needed Urgent


DP
29-Aug-2006, 12:32
Went to Clean the DD bike, discovered the Sprocket carrier is Shattered !!

don't know what has caused it but need a new one urgent, any suggestions?

DP

skidlids
29-Aug-2006, 12:37
Jim at Bike Enders on 01708 455530

DP
29-Aug-2006, 13:01
No luck Jim couldn't help I am afraid.

couchcommando
29-Aug-2006, 13:17
I think I've got one from a 600ss ? is this any use ?

DP
29-Aug-2006, 14:01
Not Sure, could you possibly check it against your Monster 620 for me and if it looks OK happy to exchange it for Cash
DP

couchcommando
29-Aug-2006, 14:03
Have a look later as I've got to take the monsters wheels out for new tyres.

twpd
29-Aug-2006, 14:09
I think I have a spare. I will check. :)

skidlids
29-Aug-2006, 15:01
600 Monster and SS ones will not fit, neither will ones from 750/900SS or 750SSie. I also suspect earlier 900SSie ones and 750 and 900 Monster ones will not fit either. Most of these if not all use a 17mm wheel spindle where as the 620 Monster uses a 25mm spindle

antonye
29-Aug-2006, 15:24
I think we may have one ... because the 'ole is too big for our spindle!

I'll measure the hole tonight and let you know what size. Technically it belongs to Mark but it's in my garage and I claim salvage rights ;)

Paul James
29-Aug-2006, 15:34
Technically it belongs to Mark but it's in my garage and I claim salvage rights ;)

Bet he don't leave much about round your gaff then mate :)

Any choccy biscuits ?

antonye
29-Aug-2006, 16:12
Any choccy biscuits ?

Those are the FIRST things that get put into his boxes and taken home ;)

Paul James
29-Aug-2006, 16:19
Those are the FIRST things that get put into his boxes and taken home ;)

Yeah I got the impression he was probably on a similar diet to me ;)

DP
29-Aug-2006, 16:29
I think we may have one ... because the 'ole is too big for our spindle!

I'll measure the hole tonight and let you know what size. Technically it belongs to Mark but it's in my garage and I claim salvage rights ;)


I would be very happy to sort this out with you or Mark

Thanx

domski
29-Aug-2006, 17:47
If you get stuck, give Rich @ Louigi a ring. I'm sure he would have a second hand one and I'll collect it for you tomorrow or Thursday.

01761 453366

paynep
29-Aug-2006, 17:48
If no-one else can help, I have one off a 620 Monster and will be going up to Snet on Friday pm......

Paul 07790 770469

DP
29-Aug-2006, 18:21
Chaps I think I am now sorted thanx for all your Help

butch890
29-Aug-2006, 18:59
You'l just need me to fit it for you cowboy,i'll try to remember to tighten all the nuts!
butch

antonye
29-Aug-2006, 19:52
Every time I see you, you make my nuts tighten enough as it is...

DP
29-Aug-2006, 20:24
Anyone know what might have caused it as the carrier is shreded!!!!!! only one bolt has any alloy surrounding it ?

antonye
29-Aug-2006, 20:46
They are cast items and very brittle from my experience - I caught one of my spares and it snapped the edge off it really easily. It may have had an impact at some point or maybe had a stress line in the cast that made it weaker.

Paul James
29-Aug-2006, 21:06
Every time I see you, you make my nuts tighten enough as it is...

I've always suspected there was something strange about you :lol: :lol: :lol: