PDA

View Full Version : Quickie! pinch bolts for chain adjuster torque setting?

Popeye
13-Sep-2006, 10:38
Anyone tell me what it is for the 748 please?

TIA :)
polarexpress
13-Sep-2006, 10:53
Chain eccentric adjuster screw M 12x1.25, 31Nm (+/-5% tolerance)
GREASE Shell HDX2
Torque sequence 1-2-1
nelly
13-Sep-2006, 10:53
33Nm :) tighten one up then the other, then go back and do them again so as to make sure they are both done up correctly.
Popeye
13-Sep-2006, 11:53
thanks peeps :)

(but they're 14 milli's ???)
nelly
13-Sep-2006, 11:55
The bolt heads are 14mm. The thread is M12 x 1.25.
Popeye
13-Sep-2006, 12:09
The bolt heads are 14mm. The thread is M12 x 1.25.

Aha! That'll be my simple engineering practice of referring to bolts by their head sizes :)
polarexpress
13-Sep-2006, 14:24
33Nm :)
That's strange. I got my number from my 998R workshop manual.

Why would there be a discrepancy btw the torque numbers for the 748 and the 998?