Brake switch

[9rrr]

Think I am going to go for the upgraded BREMBO brake and Clutch master cyliders for my 996r, but have been told that the original brake switch wont go into the upgraded Brembo MASTER CYLINDER UNIT. The supplier says they would supply a banjo type switch which you attach to the master cylinder. The banjo senses the difference in pressure when you apply the brake which activates the brake light.
Question. Im CRXP at diy, is this an EASY job to be tackled. HAS ANYONE GOT A PHOTO OF THE UPGRADED BRAKE MASTER CYLINDER WITH THIS BANJO ATTACHED. Thanks Ian

[Lily]

I can take a picture and post it but it won't be for another couple of weeks as Bike is off to Spain

[keefer]

its very very easy
you wont have a problem

[9rrr]

Lily that would be great if you would do that. Keefer I admire your trust

[keefer]

Stevie Wonder could do it
you will be fine
http://img294.imageshack.us/img294/4593/cimg0677mediumoe8.jpg

[9rrr]

Top man. Thanks very much. Incidentally. Could you see an improvement over the standard brake set up ?.