PDA

View Full Version : "Cloudy" front fender


Big Duke 6
10-Nov-2006, 12:55
The front carbon fender on my 888 needs re-finishing as it's gone white in patches..if I rub it down a bit and re-laquer will it come up any good, or should I just source a newer one? or get it painted red?

Thanks in advance

antonye
10-Nov-2006, 13:18
Its the effect of UV light breaking down the resin that causes the milky effect.

You should be able to (carefully!) sand it out and then apply some clear coat to build up a shine again.

DaveB916
10-Nov-2006, 16:52
Try some black boot polish, was a tip from a mate and worked for me.

Bit of elbow grease and it looks good again.

keefer
10-Nov-2006, 17:04
don't think the boot polish idea will last
but have a go if you want

meanwhile sand it down with wet and dry and get it lacquered.
works a trick
my air ducts went the same.
they look blingin now though

Big Duke 6
12-Nov-2006, 15:41
Cheers for the advice, think I'll try the lacquer route.