touring screen / bar rissers

[podkin99]

Hi every one i have just brought a st4 after having to amit i am old an the 916 may be is not be the right bike to go touring on to the WDW and i love it but i was thinking of changing the screen for a touring one of some kind ,any coments good or bad would be great also i seen bar risers on a site in the usa just ones which lift the standard bars up and back .There are 12mm ones and 25mm ones ,but i read some coments that with the 25mm ones when you turn all the cables go tight your advise would be super to pod.

[Iconic944ss]

Hello Pod!

Ive been to WDW twice on my ST4s now and the bike was always much better than I was!

Ive still not found a screen I'm 100% happy with - I have the Ducati touring upper fairing and screen now & I only rate it as average.

Standard screen with a Laminar Lip http://www.laminarlip.com/ is the most comfy Ive tried but a hi-rise screen can work well, I like http://www.zerogravity-racing.com/

Here are some bar risers from a great guy in Ireland:

http://www.ebay.co.uk/itm/DUCATI-BAR-RISER-STUBS-FIT-ST-S4-MONSTER-UP-TO-2004-TOP-YOKE-CHANGED-AFTER-2004-/262142775469

So you can fit 50mm clip ons.

or you can fit riser plates under your existing clipons.

Ive raised my bars a CRAZY amount, careful cable routing and longer brake hoses are needed the only problem at the 75mm extra height I have is that the choke cable cannot work - a longer cable might work but, Ive not sussed that out yet...

https://farm1.staticflickr.com/703/20670613314_bdeb63f45e_c.jpg