Lavras
09-Mar-2011, 21:26
I recently bought a Bucci Clutch on ebay
The clutch disks were not the same from the instructions, but since I have some spare clutch disks I used them to obtein the instrutions disks compilations.
The problem is that when starting to move the bike, in a low engine rotation, every thing is fine, but if I rev the engine to 3500 rpm or more, at firts every thing seams fine, but then the bike jumps a lot and squils - makes funny noises - (sometimes it iven stalls) and finally stops the jumps and rolls ok.
I tryed a lot of thing to try to stop this:
- i've sanded the iron disks
- I add another iron disk to obtein a 38mm thick group of disks
but It keaps doing the same.
Every thing else is ok. The slipper clutch is work well when I Reduce gears and while rolling, the clutch is smooth like it sould.
Please try to gide me trough this problem
The clutch disks were not the same from the instructions, but since I have some spare clutch disks I used them to obtein the instrutions disks compilations.
The problem is that when starting to move the bike, in a low engine rotation, every thing is fine, but if I rev the engine to 3500 rpm or more, at firts every thing seams fine, but then the bike jumps a lot and squils - makes funny noises - (sometimes it iven stalls) and finally stops the jumps and rolls ok.
I tryed a lot of thing to try to stop this:
- i've sanded the iron disks
- I add another iron disk to obtein a 38mm thick group of disks
but It keaps doing the same.
Every thing else is ok. The slipper clutch is work well when I Reduce gears and while rolling, the clutch is smooth like it sould.
Please try to gide me trough this problem