An impact driver is something you hit the end of with a big hammer which then turns very slowly and shifts very tight nuts etc.

Thats right you wack it with a hammer:)

thought it would help undo that sprocket nut, or am I just far**ng in the wind?

Well, I think you are talking about me. :bouncy:

Like I said. I have no problem with mine. When Im finished, I re torque with my hand wrench.:smug: All correct setting etc.

Its horses for courses innit? I will let you guys get on with it!:smug::lol:

To undo the sprocket nut......leave bike on side stand. Standing on the wheel side of the rear, put your right foot on the brake, lie your body weight over the seat, and with your right hand hold the socket on the sprocket nut, with your left hand pulling the wrench (I use my torque bar turned right up) feel the nut undo!
You do have to feel it as the nut is not very wide. Worked for me every time............

It's not an IMPACT driver though is it??

Did you bother to read the question?? :flame:

:D :D :D

Here's a cordless IMPACT wrench ;) for £55 inc p&p (180ft lbs)

http://cgi.ebay.co.uk/ws/eBayISAPI.d...e=STRK:MEWA:IT

BTW, B&Q don't list a single impact wrench.


[Edited on 25-2-2005 by Mr_S]

Argos use to do a 1/2" one that plugged into a car lighter socket or across a battery and Machine Mart also did one.

Argos £25

http://www.argos.co.uk/webapp/wcs/st...ckfrom=imag e

Machine Mart £30

http://www.machinemart.co.uk/product.asp?p=060810013

Yep, bought mine from Argos in the sale - £9.99 :D

http://www.argos.co.uk/webapp/wcs/st...clickfrom=name