Ducati ‘95 916 Strada Suspension*& Chassis Setup

TIRE PRESSURE

Front/Rear: 32.5/36psi

FRONT DAMPING (Showa Forks)

Compression Damping (turn screws at bottom of fork clockwise till stop, then)

12 clicks counterclockwise

Rebound Damping (turn screws at top of fork clockwise till stop, then)

10 clicks counterclockwise

PRELOAD

Front Spring Preload (22mm wrench at top of fork)

0.78in (20mm) - 3rd notch from the top showing)

Rear Spring Preload

0.78in (20mm) of thread above top lock ring showing

REAR DAMPING (Ohlins)

Compression Damping
Turn resevoir (marked) knob clockwise to increase damping till stop, then

14 clicks counterclockwise

Rebound Damping (dial on bottom of spring)
Kneeling at left side of bike, turn the knob counterclockwise to increase damping till stop, then

14 clicks clockwise

Johnpick, you pays your money and..... become a member of a great club.
any problem and the guys on here will have it sorted in no time.

with a selection of B&Q hammers ........ :ninja:

Dibble, surprised you hav'nt tried to promote screw fix for all your motorcycling needs:D