I was gonna do the same thing, let us know how it goes, and a pic would be fab :D

Try a U2U to Dave W, he has done it to his 998R and if my memory serves, has also done Tart2's recently too.

Rgds, Rob

I did them on my old RSV with tape from Halfords. Dead easy to fit, just take your time.

As a sign company we do it all the time (incl mine) and it really is very easy to apply 3mm straight cut vinyl to the rims.

Just make sure you clean the wheels properly 1st, take the wheels off the bike, take your time, and overlap the joints by a couple of mm.

If you were to take a close look at any professional race bikes graphics (including the wheels on toselands F05),they are all using this method.

Painting them is fiddly,hence expensive.:D