you could try one of these:- the thread size on the SS cam and the audi top shock are the same size (i just measured them) so i would assume the peg sizes are the same (i have nylock nuts on my audi) im gonna order one just to find out for a little more than a fiver what do i loose i can use on me car anyway!!!!

http://www.jbtools.co.uk/cgi-bin/sh0...3aSX028#aSX028

this company does them too cheaper shipping too
http://www.justoffbase.co.uk/s.nl?sc=7

will let you know if it fits

[Edited on 20-8-2005 by monstermob 998]

Good man;)

the toll for the engine head bolts are £135 + vat, try the ring spanner to remove and crows foot to tighten if your confident in torqueing them up correctly

i wasnt and tahst why louigimoto has my bike to have the work done

nah forget it DC--- the peg sizes are the same but the ducati slots /pegs are on a larger diameter than the VW/Audi ones-- but i did get a whisper that german and swedish do a set of three strut nut tools for under a tenner!!!- the quest continues

Any more info on the Swedish ones? Maybe I could find out some more with a bit more info.

Anything like these ones?

http://www.biltema.se/products/produ...?iItemId=79597

[Edited on 23-8-2005 by Ericsson]

ericsson mate-- thats the type of thing we are looking for- that is very similar to the Draper set -- german and swedish is a auto factors(car spares supplier in UK) specifically for german and swedish cars i:e audi/VW/bmw saab etc

http://www.gsfcarparts.com/


the distance between the pegs is around 22-25mm i havent measured them specifically yet will do tomorrow

the quest is going global!!!

thanks for your input ericsson-- we'll keep searching there must be tool to subsitute the ducati ones

[Edited on 23-8-2005 by monstermob 998]

Drawing with dimensions attached.

Mike

Well I thought it was. Trying again

Mike

The quest continues.;):D

DC.

If you need a good clutch holding tool this is the one used in the haynes manual, it worked for me

Motion pro part number 08-0008

UK distributor around £ 22.00 inc postage

Allen's Performance R&D
Unit B9, Moorbridge Road
Bingham, Nottingham NG13-8GG
Phone: 011-44-1949-836-733
Fax: 011-44-1949-836-734