Ducati Sporting Club UK
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Ducati Sporting Club UK (/msgboard.php)
-   999 / 749 (/forumdisplay.php?f=84)
-   -   well suited with Abba stand (/showthread.php?t=27667)

andyb 01-Mar-2006 20:47
Quote:
Originally posted by The Big Red One
Can't see it being that bad i hear it's more to do with the stack of plates. Racing you stack them one way and road use stack two steels at the end. But should check all the fitting destructions before i start.

Its not just about the order of the stack.....its the height that you stack them! gis a shout if your unsure............

Loz 01-Mar-2006 21:10
I've used an Abba stand and a small jack with a block of wood as a buffer under the engine, to swap out the front wheel and forks on my T9. Job done.
:burn:

mark749s 01-Mar-2006 21:25
Daz
It was £94.95 inc del and fittings for a 749 from the abba stand web site www.abbastands.co.uk

Mark

khu996 01-Mar-2006 21:34
Quote:
Originally posted by andyb
Quote:
Originally posted by The Big Red One
Can't see it being that bad i hear it's more to do with the stack of plates. Racing you stack them one way and road use stack two steels at the end. But should check all the fitting destructions before i start.

Its not just about the order of the stack.....its the height that you stack them! gis a shout if your unsure............

What is it about the height of the stack of the plates?

Im sure I read somewhere about them being 36-38mm tall?


All times are GMT +1. The time now is 19:08.
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK