Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   998 / 996 / 916 / 748 (/forumdisplay.php?f=85)
-   -   Is there a Mod for the stand on my 748R (/showthread.php?t=30262)

wato39 07-May-2006 01:15

Quote:

Originally posted by Carbon749
Get one here ... less than £7 including postage

http://cgi.ebay.co.uk/ws/eBayISAPI.d...7324%26fvi%3D1

[Edited on 6-5-2006 by Carbon749]

Just ordered one of the above,thanks again everyone for the advice .

AndyW 07-May-2006 10:18

It's best to keep her upright when warming up.
I was told by a longstanding Duc owner that it's an oil thing, you starve the clutch side of the engine.
Use minimum revs 1000 max; it takes 2 min for the oil to fully reach the rockers on the top cylinder head!
Less revs = less initial wear, you have the lumpiest cams on a Duc and these wear the rockers more.
The 748r is a lot harder to warm up than a bip as the lightened flywheel struggles to keep the engine turning over.
I've had a 2002 r for the last 2 years and have worked out some of its idiosyncrasies.

wato39 07-May-2006 17:00

Quote:

Originally posted by AndyW
It's best to keep her upright when warming up.
I was told by a longstanding Duc owner that it's an oil thing, you starve the clutch side of the engine.
Use minimum revs 1000 max; it takes 2 min for the oil to fully reach the rockers on the top cylinder head!
Less revs = less initial wear, you have the lumpiest cams on a Duc and these wear the rockers more.
The 748r is a lot harder to warm up than a bip as the lightened flywheel struggles to keep the engine turning over.
I've had a 2002 r for the last 2 years and have worked out some of its idiosyncrasies.

Thanks for that , makes alot of sense.


All times are GMT +1. The time now is 13:30.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK